Search results

  1. S

    Enable Wifi/Ethernet (eth0) Buildroot [Solved]

    Found it. First here is a list of packages I installed. The most important one iis openssh a) In Developement tools For now I am sure that we will be needing: cvs, make, gperf, git,server support, pkg conf and libtool b) in Interpreter languages and scripting: luajit, micropython...
  2. S

    Enable Wifi/Ethernet (eth0) Buildroot [Solved]

    I may suspect a lack of packages installed during the build. I didn't include ssh packages and I don't know which one are relevant in the case of Buildroot. You can find a list here and hope that it can be helpful. https://github.com/buildroot/buildroot/tree/master/package
  3. S

    Enable Wifi/Ethernet (eth0) Buildroot [Solved]

    yeah but he used "#" which excludes the second one. Is that true ?
  4. S

    Enable Wifi/Ethernet (eth0) Buildroot [Solved]

    auto lo iface lo inet loopback # Configure eth0 with static IP none eth0 iface eth0 inet static network 192.168.8.0 netmask 255.255.255.0 gateway 192.168.8.1 dns1 8.8.8.8 dns2 8.8.4.4 # Configure eth0 with dhcp IP # auto eth0 # iface eth0 inet dhcp This...
  5. S

    Enable Wifi/Ethernet (eth0) Buildroot [Solved]

    this what I get when I ifconfig -a # ifconfig -a eth0 Link encap:Ethernet HWaddr 00:80:E1:42:6B:16 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0...
  6. S

    Enable Wifi/Ethernet (eth0) Buildroot [Solved]

    Why should I do so ? I want to use ethernet too, not only wifi
  7. S

    Enable Wifi/Ethernet (eth0) Buildroot [Solved]

    if-up.d is empty. I found this on a website and configured it according to my own network which I got from windows CMD --> ipconfiall /all --> Wireless LAN adapter WLAN # Configure eth0 with static IP auto eth0 iface eth0 inet static #same as the adress found in the network and internet...
  8. S

    Enable Wifi/Ethernet (eth0) Buildroot [Solved]

    # cat interfaces # interface file auto-generated by buildroot auto lo iface lo inet loopback # The other command does not trigger an error but displays nothing but in the network folder I found these docs if-down.d if-pre-up.d interfaces if-post-down.d if-up.d p.s interfaces is...
  9. S

    Enable Wifi/Ethernet (eth0) Buildroot [Solved]

    What is difficult exactly ? cd etc # ls auto.master inittab request-key.conf auto.misc inputrc request-key.d auto.net issue resolv.conf auto.smb mtab sensors.d autofs.conf...
  10. S

    Enable Wifi/Ethernet (eth0) Buildroot [Solved]

    systemctl list-unit-files does not work in my case --> command not found is it a package ? because I also didn't find it when searching for it in the package list included in buildroot. (there is systemd and systemd-bootchart # uname -a Linux buildroot 4.19.26 #1 SMP PREEMPT Sun Oct 25...
  11. S

    Enable Wifi/Ethernet (eth0) Buildroot [Solved]

    Sorry I have made a Mistake.. My actual distro is Buildroot and not OpenSTLinux. Quiet confused these days because I am working with both. But yeah the problem remains the same. This is the Output that I get # cat /etc/os-release NAME=Buildroot VERSION=2019.02.1-00104-g0dbb719bf0 ID=buildroot...
  12. S

    MPU nteraction with a Endpointrest through wifi

    Hello everyone, I received my STM32MP157C-DK2 device and I built a Buildroot-image and flashed it successfully. I am new to STM32 and to the IoT field so perhaps you can orient me and tell me which Programs I need to do so. I want to write a "hello_world" program that sends hello_world every...
  13. S

    Enable Wifi/Ethernet (eth0) Buildroot [Solved]

    Hello Everyone I built a Buildroot image for my STM32MP157C-DK2 and I would like to enable Wifi and Ethernet. Are there some specific packages that I need to install before doing so ? I found this article here but I it is specific for an STM32 device with OpenSTLinux so I don't know if it...
  14. S

    what are the first steps with Buildroot after flashing my SD-Card

    The beginner with Buildroot that I am, has freshly flashed his STM32MP157C-DK2 SD-Card with it's corresponding Buildroot image : My problem is that the MPU does not respond to any command. I am only used to Ubuntu and debian where installing packages is really easy compared to Buildroot. I am...
  15. S

    Installing GCC on STM32MP157

    Not Completely. I have to make some tiny configuration but it won't take much time
  16. S

    Installing GCC on STM32MP157

    Solved ! From all websites forums and people talking and talking only one guy solved my Problem. It seem like running a make command and building files ( the most important one images ) while running WSL is only possible if you upgraded WSL from WSL1 to WSL2.
  17. S

    Installing GCC on STM32MP157

    Oh I Understand Well first the steps in the buildroot configuration website hat I shared have to be done on a host pc with WSL Ubuntu 18.04. Meaning that every package you talked about is already installed and was updated. If you have a look at the website you will notice that a Buildroot file...
  18. S

    Installing GCC on STM32MP157

    Hello Everyone I wanted to Install Buildroot on my STM32MP157-DK2 according to this website: https://bootlin.com/blog/building-a-linux-system-for-the-stm32mp1-basic-system/ Unfortunately as a beginner with OpenST-Linux and Yocto I got stuck at that step where I couldn't find a way t...
  19. S

    Yocto-STM32MP157C-DK2

    So you were right. It seems like using a VM will only complicate things even more. I installed Ubuntu 18.04 from the Windows Store and I made the same steps indicated in the article. The only tiny difference is that exporting the Path on Windows is done manually through the System properties...
Top