How to fix Conky's Ram and Storage Reading :(

archiman.ch5

Member
Joined
Jul 2, 2020
Messages
35
Reaction score
7
Credits
261
untitled.gif
 


Without seeing your conky config, it would be difficult to tell!
 
OK, taking a more detailed look at the image you’ve posted - The storage part looks OK to me.

The disk usage on the drive is only 31.8Gb.
The total storage space is just over 900Gb.
A quick bit of mental arithmetic puts the total disk usage to be between approximately 3% and 4%. So that bar looks correct to me.

The swap usage again is only roughly ~1%. So that looks good.

The only thing that looks off is the RAM reading..... -3.5Gb. I’m not sure what is causing this. The bar is wrong because the reading for the amount of memory used is wrong.

And the conky config itself looks ok. Maybe it’s a bug with conky itself?!
You’re running arch, so you’re on the bleeding edge. So perhaps this will be fixed the next time conky is updated?!
 
i face this problem only in arch... i use garuda linux which is based on arch and its working fine
 

I have seen this "negative RAM" bug in Conky, sometimes in a distro, sometimes in other distros, for more than 1 year, now.

First time, I have seen this bug in PCLinuxOS, August 2019 ─ but its team worked and corrected it.

Then, it happened in openSUSE Tumbleweed, at least in December 2019.

I cannot discard other cases, last year, because I didn't use a standard "label" to it in my screenshots, back then, and it is hard to find out now.

This year, I have found many cases ─ and the RAM usage at startup, when Conky turned back from "negative" to positive amount of RAM:

Code:
2019-08-16 - PCLinuxOS
2019-08-16 - PCLinuxOS
2019-08-16 - PCLinuxOS
2019-08-16 - PCLinuxOS
2019-08-29 - openSUSE
2019-12-19 - openSUSE      486 MiB
2019-12-19 - openSUSE      486 MiB
2020-01-07 - openSUSE      482 MiB
2020-07-16 - Fedora             607 MiB
2020-07-16 - Arch                 531 MiB
2020-07-16 - Void                 478 MiB
2020-07-16 - Void                 478 MiB
2020-07-19 - Mageia             601 MiB
2020-07-23 - Mageia             597 MiB
2020-07-23 - Fedora
2020-07-23 - Arch                  516 MiB
2020-07-23 - Arch                  519 MiB
2020-07-29 - Arch                  518 MiB
2020-08-01 - Void                   491 MiB
2020-08-01 - Mageia              613 MiB
2020-08-01 - Fedora              673 MiB
2020-08-01 - Fedora              673 MiB
2020-08-01 - Arch                  531 MiB
2020-08-02 - Fedora              662 MiB
2020-08-02 - Fedora              660 MiB
2020-08-02 - Arch          533 MiB
2020-08-19 - Arch          535 MiB
2020-08-19 - Arch          536 MiB
2020-08-22 - Arch          546 MiB
2020-09-02 - Arch          535 MiB
2020-09-04 - Arch          546 MiB
2020-09-19 - Arch          556 MiB
2020-09-19 - Arch          562 MiB
2020-09-24 - Arch          553 MiB
2020-10-04 - Arch          554 MiB
2020-10-05 - Arch          556 MiB
2020-10-05 - Arch          559 MiB

Back in July-August 2020, it stopped in Fedora, openSUSE, Mageia. ─ Now, Conky says they all use 900+ MiB RAM at startup ─ and that Void uses 700+ MiB RAM at startup.

I have never seen "negative" RAM usage in Debian ─ but now Conky says Debian is using 900+ MiB RAM at startup (and I don't believe it).

Just in Arch Conky keeps showing "negative" RAM usage ─ but at least, it doesn't show 900+ MiB in Arch.

EDIT

Negative RAM usage - Bug # 877 - August 2019
https://github.com/brndnmtthws/conky/issues/877

High CPU usage with conky (...) - Bug #876 - August 2019
https://github.com/brndnmtthws/conky/issues/876

Fix for #877 #878 - Aug 2019
https://github.com/brndnmtthws/conky/pull/878

Negative / too low memory reading - Bug #886 - September 2019
https://github.com/brndnmtthws/conky/issues/886
 
Last edited:

Members online


Top