while doing some research on Software Defined Radio Control, I was directed to the link below
This is a text document with the commands required to install the GNU Radio Companion, and other software in Raspian Buster. I copied and pasted the instructions, one at a time, and found that there is a missing instruction between lines 13 & 14. Insert the instruction mkdir ~/rtl-sdr between lines 13 & 14, and it works fine.
Gnu radio Companion runs with no device connected, but rtl_433 fails if it does not detect the USB module.
Hopefully this correction will keep someone from pulling their hair out, or at least some of it
Happy Trails,
Paul
Minimal Gnuradio / GQRX setup on RasberryPI 3 / 4, Raspbian Buster
Minimal Gnuradio / GQRX setup on RasberryPI 3 / 4, Raspbian Buster - minimal_gnuradio_rpi_buster.txt
gist.github.com
This is a text document with the commands required to install the GNU Radio Companion, and other software in Raspian Buster. I copied and pasted the instructions, one at a time, and found that there is a missing instruction between lines 13 & 14. Insert the instruction mkdir ~/rtl-sdr between lines 13 & 14, and it works fine.
Gnu radio Companion runs with no device connected, but rtl_433 fails if it does not detect the USB module.
Hopefully this correction will keep someone from pulling their hair out, or at least some of it
Happy Trails,
Paul