problems with woeusb

Mr Mushroom

Member
Joined
Jan 20, 2019
Messages
49
Reaction score
14
Credits
22
Installation failed!
Exit code: 256
Log:
WoeUSB v@@WOEUSB_VERSION@@
==============================
Mounting source filesystem...
Wiping all existing partition table and filesystem signatures in /dev/sdb...
/dev/sdb: 2 bytes were erased at offset 0x000001fe (dos): 55 aa
/dev/sdb: calling ioctl to re-read partition table: Success
Ensure that /dev/sdb is really wiped...
Creating new partition table on /dev/sdb...
Creating target partition...
Making system realize that partition table has changed...
Wait 3 seconds for block device nodes to populate...
Cluster size has been automatically set to 4096 bytes.
Creating NTFS volume structures.
mkntfs completed successfully. Have a nice day.
--2019-12-28 16:27:57-- https://github.com/pbatard/rufus/raw/master/res/uefi/uefi-ntfs.img
Resolving github.com (github.com)... pulse
64:ff9b::8c52:7203, 140.82.114.3
Connecting to github.com (github.com)|64:ff9b::8c52:7203|:443... pulse
connected.
HTTP request sent, awaiting response... pulse
302 Found
Location: https://raw.githubusercontent.com/pbatard/rufus/master/res/uefi/uefi-ntfs.img [following]
--2019-12-28 16:27:58-- https://raw.githubusercontent.com/pbatard/rufus/master/res/uefi/uefi-ntfs.img
Resolving raw.githubusercontent.com (raw.githubusercontent.com)... pulse
64:ff9b::9765:3485, 151.101.52.133
Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|64:ff9b::9765:3485|:443... pulse
connected.
HTTP request sent, awaiting response... pulse
200 OK
Length: 524288 (512K) [application/octet-stream]
Saving to: ‘/tmp/WoeUSB.BZXN7z.tempdir/uefi-ntfs.img’
0K .pulse
......... .......... ...pulse
....... .pulse
......... .......pulse
... 9% 16.2K 28s
50K .......... ...pulse
....... .......... .pulse
......... .......pulse
... 19% 149K 14spulse
100K .......... .pulse
........pulse
. .......... .....pulse
..... .......... 29% 150K 9s
150K .pulse
......... .......pulse
... .......... ...pulse
....... .......... 39% 81.9K 7s
200K .......... .....pulse
..... .......... .pulse
......... .......pulse
... 48% 50.3K 6s
250K .......... .......... .........pulse
. .......... .......... 58% 64.4K 4s
300K .......... .pulse
......... .......pulse
... .......... ...pulse
....... 68% 93.0K 3s
350K .........pulse
. .......... .....pulse
..... .......... .pulse
......... 78% 19.7K 3s
400K .......pulse
... .......... ...pulse
....... .........pulse
. .......... 87% 85.8K 1s
450K ..pulse
........ .......... .pulse
......... .......pulse
... .......... 97% 22.6K 0s
500K ...pulse
....... .. 100% 6.28K=14s
2019-12-28 16:28:13 (36.8 KB/s) - ‘/tmp/WoeUSB.BZXN7z.tempdir/uefi-ntfs.img’ saved [524288/524288]
1024+0 records in
1024+0 records out
524288 bytes (524 kB, 512 KiB) copied, 1.78967 s, 293 kB/s
Mounting target filesystem...
Applying workaround to prevent 64-bit systems with big primary memory from being unresponsive during copying files.
Copying files from source media...
Installing GRUB bootloader for legacy PC booting support...
Installing for i386-pc platform.
Installation finished. No error reported.
Installing custom GRUB config for legacy PC booting...
Resetting workaround to prevent 64-bit systems with big primary memory from being unresponsive during copying files.
/usr/bin/woeusb: line 1676: echo: write error: Invalid argument
The command "exit 0" failed with exit status "1", program is prematurely aborted
 

Members online


Top