noobusinglinux
New Member
hello all
im currently trying to use a TP-LINK Archer C7 Wireless AC1750 Dual-Band Gigabit Router connected to my ipfire blue interface i have addded another gigabit ethernet card to the machine and configured it as blue0 interface in the setup. then connected it to the blue port on the router
when i started the router fedora an ubuntu distributions could not connect to the acces piont but my android phone could connect.
my network ipfire interface is configured with:
red0: (static ip)
netmask 255.255.255.252
dns 8.8.8.8 and 4.4.4.4
green0 192.168.0.1
255.255.255.0
blue0 192.168.1.1
netmask 255.255.255.0
then from the web interface
firewall/blue access
added source ip 192.168.1.2/25 without mac address (supposed to allow all access)
and 192.168.1.2 added from DHCP lease list
both are showing a hostname of wifi.privatedomain
network/DHCP server
green interface enabled
start address:192.168.0.4 end address:192.168.0.50
domain name suffix: privatedomain
primary dns server: 192.168.0.1 secondary 192.168.0.3
blue interface enabled
start address 192.168.1.2 end address 192.168.1.25
domain name suffix privatedomain
primary dns 192.168.1.1 secondary 192.168.1.26
TP-LINK Archer C7 Wireless AC1750 Dual-Band Gigabit Router:
in IPTV the IGMP proxy is enabled mode:automatic
DHCP enabled with
security:
System routing table:
its alot of details and im not quite sure how i got it this way but after changing the router network from 192.168.0 to 192.168.2 the linux distrobutions were able to connect to the access point and i cant seem to do anything other thain browse google and the tp-link router configuration
does anybody know how to configure ipfire blue0 interface with a router that can tell me what i do wrong?
thanks
im currently trying to use a TP-LINK Archer C7 Wireless AC1750 Dual-Band Gigabit Router connected to my ipfire blue interface i have addded another gigabit ethernet card to the machine and configured it as blue0 interface in the setup. then connected it to the blue port on the router
when i started the router fedora an ubuntu distributions could not connect to the acces piont but my android phone could connect.
my network ipfire interface is configured with:
red0: (static ip)
netmask 255.255.255.252
dns 8.8.8.8 and 4.4.4.4
green0 192.168.0.1
255.255.255.0
blue0 192.168.1.1
netmask 255.255.255.0
then from the web interface
firewall/blue access
added source ip 192.168.1.2/25 without mac address (supposed to allow all access)
and 192.168.1.2 added from DHCP lease list
both are showing a hostname of wifi.privatedomain
network/DHCP server
green interface enabled
start address:192.168.0.4 end address:192.168.0.50
domain name suffix: privatedomain
primary dns server: 192.168.0.1 secondary 192.168.0.3
blue interface enabled
start address 192.168.1.2 end address 192.168.1.25
domain name suffix privatedomain
primary dns 192.168.1.1 secondary 192.168.1.26
TP-LINK Archer C7 Wireless AC1750 Dual-Band Gigabit Router:
Firmware Version: | 3.14.3 Build 150520 Rel.44934n |
Hardware Version: | Archer C7 v2 00000000 |
LAN | |
MAC Address: | 18-D6-C7-6C-D7-85 |
IP Address: | 192.168.2.1 |
Subnet Mask: | 255.255.255.0 |
Wireless 2.4GHz | |
Wireless Radio: | Enable |
Name (SSID): | goaway2.4ghz |
Mode: | 11bgn mixed |
Channel: | Auto (Current channel 11) |
Channel Width: | Automatic |
MAC Address: | 18-D6-C7-6C-D7-85 |
WDS Status: | Disable |
Wireless 5GHz | |
Wireless Radio: | Enable |
Name (SSID): | goaway2.4ghz |
Mode: | 11a/n/ac mixed |
Channel: | Auto (Current channel 36) |
Channel Width: | Automatic |
MAC Address: | 18-D6-C7-6C-D7-84 |
WDS Status: | Disable |
WAN | |||||||||||
MAC Address: | 00-0A-F5-C1-3E-AC | ||||||||||
IP Address: | 192.168.1.2 | Static IP | |||||||||
Subnet Mask: | 255.255.255.0 | ||||||||||
Default Gateway: | 192.168.1.1 | ||||||||||
DNS Server: | 192.168.1.1 , 192.168.1.26 | ||||||||||
Traffic Statistics | |||||||||||
|
DHCP enabled with
Start IP Address: | 192.168.2.2 |
End IP Address: | 192.168.2.25 |
Address Lease Time: | minutes (1~2880 minutes, the default value is 120) |
Default Gateway:192.168.2.1 | (optional) |
Default Domain: | (optional) |
Primary DNS:192.168.1.1 | (optional) |
Secondary DNS:192.168.1.26 | (optional) |
DHCP Clients List | |||||||||||||||
|
Current NAT Status: | Enabled |
Current Hardware NAT Status: | Enabled |
SPI Firewall: | Disabled |
FTP ALG: | Enabled |
TFTP ALG: | Enabled |
H323 ALG: | Enabled |
RTSP ALG: | Enabled |
SIP ALG: | Enabled |
ID | Destination Network | Subnet Mask | Gateway | Interface |
1 | 192.168.2.0 | 255.255.255.0 | 0.0.0.0 | LAN & WLAN |
2 | 192.168.1.0 | 255.255.255.0 | 0.0.0.0 | WAN |
3 | 239.0.0.0 | 255.0.0.0 | 0.0.0.0 | LAN & WLAN |
4 | 0.0.0.0 | 0.0.0.0 | 192.168.1.1 | WAN |
does anybody know how to configure ipfire blue0 interface with a router that can tell me what i do wrong?
thanks